Message
Some ink tanks are not installed
in place."
U072
"More than one ink tank of the following color is installed."
U071
Action
Possible causes are as follows:
Some ink tanks are not installed
in the correct position. (The lamp on the ink tank flashes.)
More than one ink tanks of the same color are installed. (The lamp on the ink tank
flashes.)
Confirm that the ink tanks are installed in the appropriate positions.
Massage
"The remaining level of the ink cannot be
correctly detected."
U130
Action
The remaining ink level cannot be correctly detected. (The
lamp on the ink tank flashes.)
Replace the ink tank and close the Scanning Unit (Printer
Cover).
Printing with an ink tank that was once empty may damage the
machine.
If you want to continue printing in this condition, you need
to release the function for detecting the remaining ink level. Press and hold
the Stop/Reset button for at least 5 seconds, and then release
it.
With this operation, releasing the function for detecting
the remaining ink level is memorized. Please be advised that Canon shall not be
liable for any machine malfunction or damage caused by refilled ink tanks.
If the function for detecting the remaining ink level is
disabled, the ink tank in gray is displayed on the LCD when checking the
current ink level.
Since printing in this condition may cause the
contents of the fax to be lost, the machine stores received faxes in memory
without printing until the ink tank is replaced. Print the fax stored in memory manually after replacing the ink tank. You can set
the machine to print received faxes forcibly without storing them in memory,
but a part of contents or all contents of the fax may not be printed.
Message
"The following ink tank cannot be
recognized."
U043
U140
U150
Action
The ink tank is not installed.
The ink tank is not compatible with this machine.
(The lamp on the ink tank is off.)
An ink tank error has occurred. (The lamp on the ink
tank is off.)
Message
"The ink has run out. Replace the ink tank."
U163
Action
Ink has run out. (The lamp on the ink tank flashes.)
Replace
the ink tank and close the Scanning Unit (Printer
Cover).
Printing under the current condition may damage the machine.
If you want to continue printing in this condition, you need
to release the function for detecting the remaining ink level. Press and hold
the Stop/Reset button for at least 5 seconds, and then release
it.
With this operation, releasing the function for detecting
the remaining ink level is memorized. Please be advised that Canon shall not be
liable for any malfunction or trouble which may be caused by continuation of
printing under the ink out condition.
If the function for detecting the remaining ink level is
disabled, the ink tank in gray is displayed on the LCD when checking the
current ink level.
When other codes are displayed
Turn off the machine, and unplug the power cord
of the machine from the power supply. After five minutes or more, plug the
power cord of the machine back in, and then turn on the machine. If the same
error occurs, contact your Canon service representative. See More ( )
Call us +1-855-517-2433 (Toll Free)
